The change in thedimension (Thickness Swelling; TS) was found to be high, at high boric acidcontent for boards made from Office paper/Newspaper (O/N) and Office paper/OldCorrugated Container (O/C) types. However, the boards made with 10% boric acid exhibits higher Modulusof Rupture (MOR) values than boards made with 5.0% boric acid. The highestvalue of MOR was found as 7.93 MPa with the addition of 10% boric acid withNewspaper/Old Corrugated Containers (3:1 by weight) mixtures. The Modulus ofElasticity (MOE) of the boards generally decreased with increasing boric acidcontent from 5% to 10% in furnishes. The Office paper/Newspaper had the highestMOE among the all formulations and considerable higher than standard value of600 MPa. However, the highest value ofMOE was found as 735.63 MPa with the mixture of 3:1 (by weight) proportions ofOffice paper/Newspaper proportions. The similar results were observed forInternal Bond (IB) properties of boards, as like MOE. While in general,increasing boric acid content from 5.0 to 10%, negative effects on IBproperties of boards. It was also realized that the boric acid contentand fiber proportions effects various level on thermal properties (thermalconductivity; TC). The boric acid had usually provided higher thermalresistance, but the difference between fiber proportions and fiber typesconsisting of boric acid was important. However, the lowest TC value of 0.1455W/mK was found the boards made from only old corrugated containers fibers with10% BA content. The sound absorptionvalues of boards made from secondary fibers show a sound damping that it was steady increase up to 1600 Hz and thendecreasing. It could be realized that the soundabsorption properties of boards were generally better than that of in lower frequencies.It was also realized that the boric acidcontent and fiber proportions effects various level on thermal properties(thermal conductivity; TC). The boric acid had usually provided higher thermalresistance, but the difference between fiber proportions and fiber typesconsisting of boric acid was important. However, the lowest TC value of 0.1455 W/mK was found the boards made fromonly old corrugated containers fibers with 10% BA content. The sound absorption values of boards made from secondaryfibers show a sound damping that it was steadyincrease up to 1600 Hz and then decreasing. It could be realized thatthe sound absorptionproperties of boards were generally betterthan that of in lower frequencies.
Ofis-gazete kağıdı(O/N) ve ofis-karton kağıdından (O/C) yapılanlevhalarda borik asit içeriği arttıkça levhalardaki boyut değişiminin (Sudaşişme; TS) yükseldiği tespit edilmiştir. Ancak %10 borik asit içeren levhalarınEğilme Elastikiyet Modülü (MOR), %5.0 borik asit içeren levhalara göre dahafazla olarak kendini göstermiştir. %10 borik asit ilavesiyle en yüksek MORdeğeri, gazete/karton kağıdı (ağırlıkça 3: 1) karışımı için 7.93 MPa olarakbulunmuştur. Mobilyalarda, levhaların Elastikiyet Modülü (MOE) genellikle borikasit içeriği%5'ten %10'a yükselirken azalmıştır. Tüm formülasyonlar arasında enyüksek MOE ofis/gazete kağıdında, 600 MPa standart değerinden oldukça yüksek çıkmıştır.Bununla birlikte, en yüksek MOE değeri, ofis kağıdı/gazete oranlarının 3:1(ağırlıkça) karışımı ile 735.63 MPa olarak bulunmuştur. Benzer sonuçlar, MOE’deolduğu gibi, levhaların yüzeye dik çekme direnci (IB) içinde gözlenmiştir. Genelolarak, borik asit içeriğinin %5.0'den 10'a çıkarılması, levhaların IBözelliklerine olumsuz etki eder. Borik asit içeriği ve lif oranı seviyesinintermal özelliklere (termal iletkenlik;TC) etkileride fark edildi. Borik asitgenellikle yüksek termal direnç sağlar ancak lif oranı ve borik asit katkılılif tipinin içeriği önemli olmaktadır. Bununla birlikte, en düşük TC değeri0.1455 W / mK olan, %10 BA içeriği olan sadece karton kağıdı liflerindenyapılmış levhalar olduğu bulunmuştur. Sekonder liflerden yapılan levhaların sesyutma değerleri, sürekli olarak 1600 Hz'e yükselen ve ardından azalan bir sessönümlemesi göstermektedir. Levhaların ses yutma özelliklerinin genellikledüşük frekanslarda daha iyi olduğu anlaşılmaktadır.Borikasit içeriği ve lif oranı seviyesinin termal özelliklere (termal iletkenlik;TC)etkileride fark edildi. Borik asit genellikle yüksek termal direnç sağlar ancaklif oranı ve borik asit katkılı lif tipinin içeriği önemli olmaktadır. Bununlabirlikte, en düşük TC değeri 0.1455 W / mK olan, %10 BA içeriği olan sadece kartonkağıdı liflerinden yapılmış levhalar olduğu bulunmuştur. Sekonder liflerdenyapılan levhaların ses yutma değerleri, sürekli olarak 1600 Hz'e yükselen veardından azalan bir ses sönümlemesi göstermektedir. Levhaların ses yutmaözelliklerinin genellikle düşük frekanslarda daha iyi olduğu anlaşılmaktadır.