In this study, the model structure that is formed by using Workbenchmodule of ANSYS package software of coordinate systems under the name ofmulti-storey structures was designed as 3D dimension. Concrete mixture wasselected as the element type of the 3D model structure. Model prototype wascreated by measuring distance dependent with 16 coordinate points. Meshsegmentation was applied to the 3D multi-storey structure model, and 75 N/mm2load and 32.174 ft/sn2 acceleration motion were applied to the carrier systems.In the prototype results, deformation and vector transition analyzes betweenthe model groups were compared with the mechanical data. It was observed thatthe stresses occurring in the multi-storey structure model of the coordinatemeasuring points increased at the beam joints. It was investigated thatprototype oriented deformations produced a stress on the carrier beam legs inthe y axis towards the stable center of gravity.
Bu çalışmada, çok katlı yapılar adı altında koordinat sistemlerininANSYS paket yazılımının Workbench modülü kullanılarak oluşturulan model yapısı3D boyut olarak tasarlanmıştır. 3D model yapısının element tipi olarak betonkarışımı seçilmiştir. 16 koordinat noktalarıyla mesafeye bağlı ölçümlendirmeyapılarak model prototipi oluşturulmuştur. 3D çok katlı yapıl modeline meshbölümlendirmesi yapılarak, taşıyıcı sistemlere 75 N/mm2 yük ve 32.174 ft/sn2ivme hareketi uygulanmıştır. Prototip sonuçlarında model grupları arasındadeformasyon ve vektörel geçiş analizleri mekanik verilerle karşılaştırılmıştır.Koordinat ölçüm noktalarının çok katlı yapı modelinde oluşan gerilmelerin kirişdüğüm noktalarında arttığı gözlemlenmiştir. Prototip yönlü deformasyonlarınstabil ağırlık merkezine doğru y ekseninde taşıyıcı kiriş ayakları üzerinde birgerilme oluşturduğu incelenmiştir.